Do you really wish to abort installation? (y/n)
Should the existing data-files be deleted? (y/n)
Should the destination directory be deleted? (y/n)
Should the file config.sys be updated? (y/n)
You have maximum %d log. drives!
Please load diskette No. %d
You have selected drive %c:.
You require, however, %ld KB free disk space!
On drive %c: only %ld KB disk space is free.
Critical DOS error (%s) !
Last command: %s
The directory %s already exists!
You have the value FILES=%d in your config.sys!
HAFAS requires the values FILES=%d in your config.sys.
Access to %s is not possible!
Directory %s does not exist!
Cannot read file %s!
Cannot write file %s !
Cannot open file %s !
Error in file pointer of file %s !
Error in packed file (error no. %d) !
Insufficient free memory!
Selection aborts the installation program.
Select the scope of installation.
Select the required language for HAFAS.
Select the required program version.
Select the drive to be used for installation.
Start installation through Selection.
Select path for the temporary swap file.
Select path in which HAFAS is to be installed.
ALT-X
ENTER
ESC
F1

DOS version for 286 processor
DOS version for 386 processor onwards
(A)bort
(C)ontinue
(I)gnore
(R)epeat
Abort
Choose item
Data
Edit/Select
English
Error:
Old HAFAS version detected!
French
German
Help
Installation drive:
Installation is running ...
Italian
Language:
Installation scope
Language
Program versions
No
Please be patient
Program
Program and data
Program (Data on CD-ROM)
Program version:
Start installation
You can start the programm by typing HAFAS <Enter>
Swap directory:
Select
Destination directory:
Install:
Continue with <Enter> ...
Continue <ENTER>, abort <ESC>
Yes
Continue with ENTER
; ***********
Write protection
Unknown unit
Drive not ready
Unknown instruction
Data error (CRC)
Incorrect inquiry
Seek error
Unknown type of diskette
Sector not found
Printer has no paper
Write error
Read error
General error
Reserved
Reserved
Impermissible diskette change
; *******
; Source directory
; *******************************************
; ** Ab jetzt folgen die Online-Hilfetexte **
; *******************************************
<@>Select the source directory,46,3
Please select here the source directory.
The installation program will read the HAFAS
original files out of this directory.
<@>Select the destination directory,35,3
Please select here the drive and
the directory in which you wish
to install HAFAS.
<@>Select the swap directory,48,2
Please select the drive and directory in which
the HAFAS temporary files are to be filed.
<@>Program version,61,6
Please select the required program version.
<@>Installation language,43,2
Select the language in which installation
is to be completed.
<@>HAFAS Language,56,2
Select the language in which the timetable information
is to be supplied.
<@>Scope of installation,65,7
Select what you wish to install: data and/or program.

Select the section "Program and Data" if installation is being
completed for the first time.

"Data" or "Program" can also be selected, for instance when
another program version is installed at a later date.
<@>Start,65,4
Start installation with the adjusted parameters.

The installation program will copy all data and/or the selected
program version into the designated directory.
<@>Abort,42,2
You are leaving the installation program
and are NOT completing installation.
<@>config.sys,64,2
The entry FILES=... in the CONFIG.SYS file has been increased.
The original file is now called CONFIG.}YS.
<@>Installation successful,64,5
NOTE: You have installed the version for 80386 or 80486 PC's.
This version requires at least 2 MB main memory which can be
configured as extended memory, expanded memory or XMS. If the
program does not run, or runs only very slowly, then check the
memory configuration.
<@>Installation successful,9,1
80286
;********************************
; Ab jetzt Folgen die Errorcodes
;********************************
<@>Installation under Windows

You started the installation of the DOS version within
Windows. If you want to install the Windows version of
HAFAS, quit the program now with <ESC>. Then start the
Windows installation by executing "SETUP.EXE" from the
File Manager.

If you want to install the DOS-Version, exit Windows and
start the installation again from the DOS command line.
<@>Invalid source directory,60,2
You have selected an invalid drive for the installation of
HAFAS.Please select a diskette drive. (e.g. A:)
<@>Invalid destination directory,43,3
     The selected path is invalid!
Select here a directory on the hard disk!
(e.g.: C:\HAFAS)
<@>Invalid directory for temporary files,42,3
      The selected path is invalid!
Select here a directory on the hard disk!
(e.g.: C:\TEMP)
<@>Warning,54,2
You have started the installation program
from another drive! Check the choice of source drive!
<@>No access,23,1
Select another drive!
<@>Lack disk space,39,1
Select another drive!
<@>Directory does not exist,36,1
Select another directory!
<@>Incorrect directory,50,2
HAFAS cannot be installed on the diskette drive.
Select another drive!
<@>Destination directory,37,2
Select another destination director
or abort installation!
<@>Swap directory,56,2
Error while generating a directory for temporary data!
Select another directory or abort installation!
<@>Hint,65,3
The system file CONFIG.SYS could not be found or access to the
file was not possible. Ensure that this file contains the entry
FILES=25.
<@>EMM386 NOEMS,67,9
The system has a device driver called EMM386.EXE or EMM386.SYS
with the parameter NOEMS.
Presumably HAFAS will not run with this configuration or run only
very slowly!
If this is the case you should either remove the corresponding
entry from the CONFIG.SYS or fade it out with REM, or remove the
NOEMS parameter.
Please refer to the corresponding pages in the DOS or MS Windows
manual!
<@>QEMM ST:M/ST:F,67,4
QEMM386 is loaded in the CONFIG.SYS with the stealth parameter
ST:M or ST:F. Presumably HAFAS will not run in this
configuration. If this is the case you should either remove the
corresponding entry from your CONFIG.SYS or fade it out with REM.
<@>FILES=,45,1
The config.sys can be subsequently updated.
<@>CD-ROM Netzupdate,57,3
No HAFAS-version found in destination directory.
Please select the drive and directory in which you
have installed the single user version of HAFAS.
<@>DOS ERROR,62,3
You are conducting installation from a drive in which the
commands processor is installed. Installation is aborted. Use
another drive!
<@>Error,57,3
The configuration file install.cfg could not be opened!
Ensure that installion is from original diskettes.
Installation is aborted!
<@>Error,45,3
The text file could not be opened. Ensure
that installion is from original diskettes.
Installation is aborted!
<@>USER ABORT,62,3
You have aborted installation! HAFAS has not been completely
installed! To use HAFAS it must have been installed in its
entirety!
<@>DOS ERROR,63,3
A critical DOS error during installation! Installation is
aborted! Try to complete installation once again. Turn to the
HAFAS Hotline if this is not possible.
<@>Abort,62,2
Installation is aborted. Ensure that you are installing from
original diskettes and try once again!
<@>Errorlevel,63,3
The last command returns a DOS exit code greater than zero.
Retry installation, please. In case of appearance of the same
error, please call the hotline!
<@>error during unpacking,68,4
Unpacking could not be carried out without errors.
Installation is aborted! Try to complete installation once again.
Turn to the HAFAS Hotline if this is not possible.
<@>device error,68,4
A critical device error occurred during installation !
Installation is aborted! Try to complete installation once again.
Turn to the HAFAS Hotline if this is not possible.
<@>LANGUAGES
English=E
German=D
Polish=P
